|  SecondHand Racking  |

Adjustable Pallet Racking

Adjustable pallet racking is the most common form of pallet racking. This dynamic system can be altered and reconfigured to suit your business and warehouse requirements.



Aisle Width

1.6-5.0 metres


Depends on Truck


100% Accessibility


High Throughput Speeds


Various Forklift Options

What is Adjustable Pallet Racking?

This is the most common form of pallet racking. APR is a system of beams clipped into frames. In general, the beams support the pallet but on occasions, the pallet is also supported by timber decking, mesh decking or pallet support bars.

Adjustable pallet racking allows beam levels to be raised, lowered, added in or taken out depending on your requirements (they come in all sorts of configurations).

Adjustable pallet racking systems come in all sorts of configurations, but the importance of getting the basics right is fundamental. For a safe and efficient operation, the racking system must be designed to fit and function with both the handling equipment and the load.

Adjustable Pallet Racking Beams & Uprights

The main features of adjustable pallet racking are, the beams and uprights, as outlined below:

  • Pallet Racking Beams are roll-formed from high-quality steel and depending on beam type have either one or two sections. These sections are welded to the anchor plates and then powder coated. Our experienced sales team will recommend the most suitable racking beam for your requirements.
  • Pallet Racking Uprights are available in various widths to give bay loads of up to 35 tonnes. (Should bay loads in excess of this figure are required, please contact our sales team for free professional advice). Each racking upright is roll-formed from high-quality steel before being powder coated.

Advantages of this system

  • Adaptable (can be used on any type of unit load or forklift truck)
  • Accessible (allows immediate access to all unit loads and/or references stored)
  • Dynamic (it is easily assembled and/or disassembled, and the components can be easily replaced and/or added)
Contact Us

Pallet Racking Systems

Adjustable Pallet Racking

This is the most common form of pallet racking. APR is a system of beams clipped into frames.

In general the beams support the pallet but on occasions the pallet is also supported by timber decking, mesh decking or pallet support bars.

find out more

Very Narrow Aisle Racking

Very Narrow Aisle Racking is generally used in warehouses which are a little tighter on space.

Using a narrow aisle Forklift truck allows you to access all pallets, lifting higher and working faster than standard counterbalance trucks.

find out more

Drive-in Racking

Drive-in Racking is an ideal system for large quantities of the same type of product. It is a variation to block stacking.

It works on the principle of first in last out so is not particularly good for stock rotation.

find out more

Push Back Racking

Push Back Racking systems are designed around the principle of organising space by depth rather than width.

This depth arrangement greatly reduces aisle space and increases storage density.

find out more

Shuttle Racking

Shuttle Racking is an alternative to Drive In racking or Live Storage Racking.

The idea is that each lane is a single product but unlike drive in racking not all products within the bay need to be the same thus allowing greater density of storage.

find out more

Live Storage Racking

Live Storage Racking is a system where pallets are put onto rollers at one end and they can then run down the rollers to be picked off at the other end.

It is a relatively expensive storage solution but can improve efficiency in many warehouses.

find out more

Mobile Pallet Racking

The Mobile Pallet Racking consist of units of conventional pallet racking mounted on a steel framed base.

This system is installed over guided mobile bases that slide laterally, eliminating the need for aisles.

find out more

Special Racking

Carpets, carpet pads and rolls of vinyl are inefficiently stored on pallets, which is why carpet racks are a much better storage alternative to maximize your valuable floor space. A system that is good for storing rolled up lengths of material such as carpet.

find out more

|  Contact us  |


Fill out the form below, or call us on 0845 519 1695 and we will be in touch.

I'd like to know more about:(Required)
Max. file size: 800 MB.
This field is for validation purposes and should be left unchanged.