|  SecondHand Racking  |

Mobile Pallet Racking

This system is composed of moving blocks of racking units. It provides an efficient method of maximising storage capacity in a warehouse.

RACKING ENQUIRIESONLINE DESIGN TOOL

Features


Aisle Width

2.5-4.0 metres

Space

80% Space Utilisation

Access

All Pallets Accessible

Throughput

High Throughput Speeds

Forklift

Standard Forklift Options

What is Mobile Pallet Racking?

The Mobile pallet racking comprises units of conventional pallet racking mounted on a steel-framed base. This racking system is installed over guided mobile bases that slide laterally, thus eliminating the need for aisles, which open up only when accessed.

The wheels run along a track set into the floor. Varying rack configurations and bogie types are available to suit single-bay loads of up to 15 tonnes and run lengths of up to 30 meters.

The operator gives the order to automatically open the unit, either by remote control or manually by triggering a switch. The mobile bases have motors, sliders and several safety systems to guarantee a safe and efficient operation.

Advantages of this system

  • Optimal system for cold stores (both refrigeration and freezer types)
  • Save up to 40% of the space required by conventional pallet racking
  • Each pallet is supported individually so damage from crushing is eliminated
  • Elimination of individual access aisles
  • The modular design adapts to any requirement
Contact Us

Pallet Racking Systems

Adjustable Pallet Racking

This is the most common form of pallet racking. APR is a system of beams clipped into frames.

In general the beams support the pallet but on occasions the pallet is also supported by timber decking, mesh decking or pallet support bars.

find out more

Very Narrow Aisle Racking

Very Narrow Aisle Racking is generally used in warehouses which are a little tighter on space.

Using a narrow aisle Forklift truck allows you to access all pallets, lifting higher and working faster than standard counterbalance trucks.

find out more

Drive-in Racking

Drive-in Racking is an ideal system for large quantities of the same type of product. It is a variation to block stacking.

It works on the principle of first in last out so is not particularly good for stock rotation.

find out more

Push Back Racking

Push Back Racking systems are designed around the principle of organising space by depth rather than width.

This depth arrangement greatly reduces aisle space and increases storage density.

find out more

Shuttle Racking

Shuttle Racking is an alternative to Drive In racking or Live Storage Racking.

The idea is that each lane is a single product but unlike drive in racking not all products within the bay need to be the same thus allowing greater density of storage.

find out more

Live Storage Racking

Live Storage Racking is a system where pallets are put onto rollers at one end and they can then run down the rollers to be picked off at the other end.

It is a relatively expensive storage solution but can improve efficiency in many warehouses.

find out more

Mobile Pallet Racking

The Mobile Pallet Racking consist of units of conventional pallet racking mounted on a steel framed base.

This system is installed over guided mobile bases that slide laterally, eliminating the need for aisles.

find out more

Special Racking

Carpets, carpet pads and rolls of vinyl are inefficiently stored on pallets, which is why carpet racks are a much better storage alternative to maximize your valuable floor space. A system that is good for storing rolled up lengths of material such as carpet.

find out more

|  Contact us  |

GOT ANY QUESTIONS? WE CAN HELP.

Just call us on 0845 519 1695 or drop us a line for prompt professional attention.

I'd like to know more about:(Required)
This field is for validation purposes and should be left unchanged.